This is the Futaba 8FGHS Super 2.4GHz 14-Channel Radio System with the R6208SB Receiver and No Servos.
This is the helicopter version which will default to heli settings when powered up and has a spring loaded throttle stick.

FEATURES: 

• Ideal for flybarless helis and all other heli applications
• New software with menus that support 3-axis gyros and that are tailored to Futaba's super-fast CGT750 gyro
• VPP (Variable Pitch Propeller) compatibility can be set to three conditions for throttle and pitch curve
• Swash trim can be adjusted from swash screen
• Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
• Fourteen total transmitter channels, 12 proportional and 2 switched
• 20-model memory expandable to unlimited model setups and downloads of online software updates with a 32MG - 2GB SD memory card (memory card not included, must be purchased separately)
• R6208SB receiver accepts a wide range of batteries, from 4-cell NiCd and NiMH packs to 2S LiFe and LiPo packs with no regulator required
• Receiver is capable of controlling up to eight channels using the outputs for a conventional system and up to eighteen channels including the two digital channels by using the output for the
• S.BUS system, receiver also has a high-speed mode that delivers ultra fast frame rates on channels 1-6
• SensorTouch programming
• Factory defined mixes
• Stick calibration menus
• Trainer system (must purchase Trainer Cord
• One year limited warranty through Hobby Services beginning at date of purchase

INCLUDES: 

• 8FGHS Transmitter
• R6208SB Receiver
• HT6F1700B 1700mAh NiMH Transmitter Battery
• HBC-2B(4) Battery Charger
• Switch Harness
• Neck Strap
• Instruction Manual

REQUIRES: 

• Servos such as the Futaba S9252, S9255, S3151 and S3001

• SPECS: Transmitter;
• Transmitting Frequency: 2.4GHz band
• Modulation: 2.4GHz 7ch or 2.4G multi-channel switchable
• Power Supply: 7.2V HT6F1700B NiMH Battery
• R6208SB Receiver;
• Power Requirement: 3.7 - 7.4V battery or regulated output from ESC*
• Size: 0.98 x 1.86 x 0.56" (24.9 x 47.3 x 14.3mm)
• Weight: 0.49oz (13.8g)
• When using ESCs make sure that the regulated output capacity meets your usage application