Hitec HS-5805MG Digital Mega Metal Gear
Hitec HS-5805MG Digital Mega Metal Gear

Hitec HS-5805MG Digital Mega Metal Gear

Write a Review
Your Price: $69.99
Part Number: HRC35805S
Availability: In Stock.
This is the Hitec HS-5805 Mega Scale Digital Metal Gear Servo.        
FEATURES: For .60 class or larger aircraft, 1/4 scale car steering or throttle
            and gasoline powered boats                                        
          Programmable digital amplifier with MOSFET drive                    
          Four metal gears with resin first gear                              
          Dual ball bearings                                                  
          Heavy duty horns and hardware                                       
          Water and dust tight                                                
INCLUDES: Hitec HS-5805 Mega Scale Servo with S Connector                     
          Mega Horn and Hardware set, HRCM6318                                
          Instruction Sheet                                                   
REQUIRES: Installing in model, connecting linkage and connecting to receiver, 
            see COMMENTS below                                                
SPECS:    Operating Speed: 0.19sec/60° @ 4.8V                                 
                           0.14sec/60° @ 6.0V                                 
          Output Torque: 19.8kg cm (275oz-in) @ 4.8V                          
                         24.7kg cm (343oz in) @ 6.0V                          
          Power Consumption: 800mA unloaded                                   
          Size: 2.59 x 1.18 x 2.26" (66 x 30 x 57.6mm)                        
          Weight: 6.95oz (197g)                                               
          Length of Four Point Horn: 2.4" (61mm) at longest point             
          Length of Single Arm: 1.8" (47mm) from center of hole to end        
          Diameter of Round Horn: 1.6" (39.8mm)                               
          Thickness of Horns: 0.20" (5mm)                                     
COMMENTS: Due to the high power consumption of the servo, a NiCd or NiMH      
            battery with at least 1200mAh (preferably 5-cells and 6V) must be 
          Also, with a BEC equipped receiver the power should be fed directly 
            to the servo without going through the BEC regulator. A Y-harness 
            and instructions are provided with servo.

Related Items

KO Propo RSx3-one10 Response Servo
Model # KOP30125
In Stock.
KO Propo RSx-One 10 Ver.D Servo
Model # KOP30131
In Stock.
KO Propo RSx3-one10 Ver.D Lite Servo
Model # KOP30134
In Stock.
Kyosho Perfex KS4031-06W Servo
Model # KYO82274
In Stock.
Savox Budget Analog Servo Standard Size (Plastic Gears)
Model # SAV-B06KG
In Stock.

Recently Viewed Items

0 Items