HPI Racing Vorza S Flux Buggy 1/8 Scale 4WD RTR Brushless (Green)

The RTR Vorza S FLUX chassis features a wide range of excellent features, esteemed performance heritage, amazingly powerful motor and speed controller combination, complete adjustability in the suspension and a tunable drivetrain, if you want to experiment to tune your Vorza S FLUX to your liking.

The S Spec adds 7075 aluminum chassis plate, 7075 front and rear shock towers, 7075 front and rear suspension hangers at both ends and 16mm big bore shocks with threaded body, top cap, lower seal cap and spring adjuster all in high quality aluminum! They also include a HD version of the 4mm shock shaft!

Features:

• Factory-assembled & pre-painted 4WD 1/8 scale Car
• NEW Pre-painted body with awesome speed graphics
• Pre-mounted all-terrain tires
• High torque IP67 rated waterproof servo
• 6S LiPo Capable
• MLH-2200 2200KV brushless motor with 5mm shaft
• Waterproof 150A ELH-6S speed controller
• LiPo ready adjustable battery tray with secure hook-and-loop straps
• Aluminum heatsink motor mount help the motor stay cool with optional fan mounting
• points
• Full-time 4WD for excellent control
• Efficient and tough shaft drivetrain with front universals
• Aluminum 16mm Big Bore oil-filled shocks for confident control
• 7075 Aluminum shock towers front and rear
• 7075 suspension blocks front and rear
• Thick steel turnbuckles
• Front and rear sway bars for excellent handling
• Hardened steel spur and pinion gear for extreme durability
• Spiral-cut bevel gears for the best balance of strength and efficiency
• Tough oil-filled 4-gear differentials
• Suspension based on World Championship pedigree
• Super low CoG for superior handling
• Total adjustability: roll centre, wheelbase, camber, sway bar and more
• Nylon stone and dirt guards keep rocks out of the chassis
• Dual bellcrank steering
• Cam type servo saver
• All hex head hardware
• Full set of rubber-sealed ball bearings
• 2.4GHz Radio Set with waterproof receiver
• Enclosed receiver box

Specifications:

• Length: 508mm; Width: 205mm; Height: 178mm; Wheelbase: 325mm
• Drivetrain: Shaft 4WD
• ESC ELH-6S: Input Voltage: 3-6S LiPo; Continuous Current: 150A; Motor Limit: 4S LiPo <3000kV, 6S <2400kV; 6V/3A Switching BEC; T-Plug
• Motor FLUX MLH-2200: 2200kV; 6.5mm Bullet Connector; 12 Gauge Wire; 5mm Motor Shaft
• 2.4Ghz FHSS TF-50 Transmitter: Servo Reverse; EPA; Trims and Dual Rate switches.

Needed To Complete:

• 2 matching Battery Packs with T-Plugs
• Battery Charger