The Lunsford Turnbuckle Touch:
In the rare instance your turnbuckle bends or breaks, we will replace it for free.
What's Included:1 - 3mm x 45mm PUNISHER Titanium Turnbuckle (Servo)2 - 3.5mm x 45mm SUPER DUTY Titanium Turnbuckles (Steering)2 - 3.5mm x 50mm SUPER DUTY Titanium Turnbuckles (Front Camber)2 - 3.5mm x 55mm SUPER DUTY Titanium Turnbuckles (Rear Camber)1 - 1/8" Drill Bit
Note from Kelly:Rod End Resize: Increase
the inner diameter your rod ends with the supplied 1/8" drill bit. A
small cordless drill works best on a slow speed. Use a paper clip or
similar item to first measure the depth of the threaded area of the rod
end. Use that measurement to mark the drill bit or use a pinion gear to
set the depth of the drill bit to ensure you do not drill beyond the
existing depth of the rod end.