Racing is happy to announce that the new 721 SCUDERIA GEN2 engine is
now available. Due to the success of 721 Scuderia GEN1 engine in recent
competitions we have decided to maintain the main features unchanged and
improve the carburetor with new materials to increase reliability.
Furthermore, the new carb features a new double grab screw joint link to
facilitate positioning and fitting with the servo link. To satisfy all
our customers requests we have decided to release the new Scuderia Gen2
in 2 different color combinations (red or black) to match engines with
REDS is always striving to
innovate. This means investment into new core technologies. Drawing from
the rich experience gained through competing on the world’s best RC
tracks with the best drivers in the world, our goal is to deliver
quality products that are built with passion. The new S line does this.
new 721 S Scuderia features high reliability, tuning stability and
great fuel mileage. Combined with specific technical changes in the
porting and new materials, this 7 port engine features higher power and
better fuel efficiency compared to any REDS engine released from REDS.
testing we found the new engine is able to provide more torque compared
to our competitors, making it suitable for both Buggy and Truggy.
Over 9 minutes run time
721 S Scuderia has proved to guarantee over 9 minutes runtime in recent
competitions and tests thanks to new materials and coatings.
GEN2 engine features a new carburetor with new materials to increase
reliability and tuning stability, in particular the insulator bushing
has been improved with a higher strength material. Furthermore, it
features a new double grab screw joint link to facilitate positioning
and fitting with the servo link.
Category: 1/8 Buggy and Truggy
Displacement [cm^3]: 3,5
Bore [mm]: 16,24
Stroke [mm] 16,8
Inlet ports: 7
Outlet ports: 1
Crankshaft: balanced with low friction DLC Coating
Backplate: aluminum with low friction DLC Coating
Front ball bearing: 7x19x6 rubber seal made in Japan
Rear ball bearing: 14x25,4x6 Swiss made ceramic
Carburetor diameter [mm]: 7.0 stock (6.0, 6.5, 7.5 and 8.0 optional)
Carburetor: VCX2-A aluminum, 2 needles, GEN2
Weight [g]: 345
Fuel consumption: >9:00 min
Engine temperature: 110-130°C (depending on air temperature)
Recommended Glow plug: REDS TS3
Recommended pipe: REDS 2143 + M Manifold or 2143 X-One pipe
Recommended fuel: 25-30% nitro, 8-10% oil
Break-in fuel: 12% oil