The Tekno ET48 2.0 1/8 Electric 4WD Off Road Truggy Kit shares many
of the parts and design elements first introduced on the EB48 2.0 buggy.
A primary goal of this project was to minimise the additional parts
needed to help keep drivers on the track or bashing at their favourite
spot. You will find that quite a few of the parts you already have will
work on the ET48 2.0. Features from the 2.0 buggies have been carried
over, such as the industry-first suspension arms with built-in caster.
This allows a longer overall arm length, ideal front-end geometry and
increased durability. It has rear hubs that provide roll center
adjustments by adjusting the axle height, and the active rear toe system
has been carried over as well. A substantial amount of time was
invested in developing the smoothest suspension package available to
make the truck a breeze to drive in the roughest conditions. The quick
access differentials with increased volume have also been included to
improve consistency and efficiency with minimal maintenance time.
The ET48 2.0 body has an industry-first exposed front shock tower
design as well as a more truck-like appearance. The body is lighter,
creates more downforce for increased steering response, flies through
the air with greater ease and closer resembles a full size vehicle.
Finally, during testing, the body was found to last longer than
"standard" truggy bodies.
NOTE: Finished kit shown in photos is for illustrative purposes only.
See needed to complete list below for a list of items required to
complete the model.